Click image to view full size image
Detail Information for the mould:
Product Material |
ABS, POM, PP, PC, PC+ABS, PET, PA, PMMA, UPVC. PE, Etc |
Mould Core Steel |
P20, H13, 718H, 738, 2738, NAK80, S136, SKD61 |
Mould base: |
Standard mould base, Non-standard mould base. |
Runner |
Cold runner or Hot runner |
Cavities |
According to design and customer's request. |
Gate type |
Side gate, Sub gate, Pin point gate, Edge gate, etc |
Steel Treatment |
Heat treatment, Nitriding, etc |
Hardness |
45-52 HRC (Various from the different kinds of steel material) |
Mould Life |
300,000 Shots (Various from the different kinds of steel material) |
Now our customer from |
United State, Uzbekistan, Indonesia, Kazakhstan, Cyprus, Australia, etc |
Payment |
50% T/T deposit, and 50% T/T after checking the mould-made samples is qualified. |
Color for reference |
RAL, PANTONE |
OEM Detail |
Provide us your samples or drawing(2D or 3D are all acceptable). |
Sample Feature:
1.High Wear-resistance
2.Good Anti-corrosion-resistance
3.Good self-lubrication
4.Very high-impact resistance
5. Very good electrical insulation
6.High inadhesion resistance
7.Non-toxic and clean property
Nylon Introduction:
MC Nylon,means Monomer Casting Nylon, is a kind of engineering plastics used in comprehensive industries, has been applied almost every industrial field.
The caprolactam monomer is first melted, and added catalyst, then poured it inside moulds at atmosphere pressure so as to shape in different castings, such as: rod, plate, tube. The molecule weight of MC Nylon can reach 70,000100,000/mol, three times than PA6/PA66. Its mechanical properties are much higher than other nylon materials, such as: PA6/PA66.
E-mail: 